Search Criteria
Products meeting the search criteria
Brand: Hot Racing
Model: HRASTE100MR128
Multi-rate spring set is for the Traxxas rear shocks, used on the 2WD Slash, Rustler, and Stampede
Multi-rate springs allow the optimum spring rate for each application.
These multi-rate springs are soft at the beginning to soak up the small
bumps, but transitions (crosses over) to the stiff..
$9.89
Out Of Stock
Brand: Hot Racing
Model: HRASTE90MR128
This Multi rate Spring Set for the Traxxas Front Shocks, used on the Slash, Rustler and Stampede.
Multi-Rate Springs, Dual-Rate (DRS) allow the optimum spring rate for
each application. These multi-rate springs are soft at the beginning to
soak up the small bumps, but transitions (crosses ov..
$9.89
Brand: Integy-Top
Model: INTC28187S
OVERVIEWStrengthen up your 1/10 Traxxas Slash 2WD,
Stampede 2WD, Rustler 2WD, Bandit 2WD or Bigfoot 2WD with our Billet
Machined Alloy Diff Housing. The housing replaces your stock molded
housing with a heavy duty alloy version that features an o-ring outer
seal, diff output seals, and an HD..
$38.99
Out Of Stock
Brand: Integy-Top
Model: INTC28478BLU
INTC28478BLUE - GTX2 Front 90mm Piggyback Shocks for Traxxas 1/10 Stampede, Rustler & Slash
Includes a full set of 2 shocks...1 pair..
$32.99
Brand: Integy-Top
Model: INTC28479BLU
INTC28479BLUE - GTX2 Rear 100mm Piggyback Shocks for Traxxas 1/10 Stampede, Rustler & Slash
Includes a full set of 2 shocks...1 pair..
$32.99
Out Of Stock
Brand: PowerHobby
Model: PHBTRX534
53T 0.8 Hardened Steel Spur Gear, for E-Revo, Jato, T-Maxx, Summit, Rally,..
$20.99
Brand: RPM
Model: RPM70812
RPM's Rustler rear bumper is designed to protect the rear of the
chassis, the motor and the body, all while still allowing the use of a
stock Traxxas Wheelie Bar (Traxxas #3678 not included). Additionally,
if you decide to run without the Wheelie Bar, the rear bumper is so
versatile, it wi..
$10.95
Brand: RPM
Model: RPM73482
RPM's ESC Cage for Traxxas XL-5 & XL-10 ESCs is the most effective,
durable and best protection possible for your speed control. We
eliminated the use of the two undersized mounting tabs on the ESC in
favor of a complete cage system that solidly locks your XL-5 / XL-10 in
place. By compl..
$8.75
Out Of Stock
Brand: RPM
Model: RPM80375
Blue RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time betw..
$8.95
Out Of Stock
Brand: RPM
Model: RPM80385
TRX REAR HUB CARRIER SLASH/RUSTLER/STAMPEDE/BANDIT
1 Blue Pair of rear carriers. Replaces fragile stock carriers. Requires 5mm x 11mm bearings. Stock bearings/bushings will not fit.
Up to this point, e-Rustler, e-Stampede, Slash 2wd & Bandit owners have relied on bushings or undersized, w..
$8.25
Brand: RPM
Model: RPM80722
RPM Jato Front A-Arm- Black.
RPM Jato A-arms are designed using stock geometry, making them direct, bolt-in replacement parts. Furthermore, we’ve reduced the clearances around the hinge pins and A-arm mounting areas to help reduce slop in the suspension system, providing better, more consistent cam..
$10.50
Out Of Stock
Brand: RPM
Model: RPM80752
RPM Rear A-arms for the Traxxas Jato feature everything you’ve come to expect from RPM products – durability, strength, light weight, and the best possible value. RPM rear Jato A-arms have been redesigned to fit in the stock locations with less end-play than stock A-arms at both the inner and outer ..
$10.50