Slash 2wd Parts

Slash 2wd Parts

Here you'll find parts for the Slash 2wd Electric Version.

Display: List / Grid
Show:
Sort By:
City Block 3 Tires Pre-Mounted, 1pr, Wide, 2.2/3.2 Slash rear

1:10 SHORT COURSE CITYBLOCK 3 WIDE (SUPER SOFT) PRE-MNT RED INSERT

Fits:

  • SLASH 2WD REAR
  • Slash 4X4 F/R
  • ULTIMA SC


The CITYBLOCK 3 tread pattern has been opened up from the original, which allows the tire to dig deeper in some of the loosest of conditions.

The innovative approach to tread design launched a tire that is unmatched in its versatility.

From loose dusty tracks to high bite hard packed tracks the CITYBLOCK 3 will deliver consistent performance and has become the workhorse of the AKA tire line.

New to the 3rd generation of this tire is the 2014 ROAR National Championship winning Typo carcass for even better performance than before! Available as pre-mounted pairs or tires with inserts in the race proven soft and super soft compounds.

Inluded:

  • One Pair of Pre Mounted Tires
  • Fits Traxxas Slash 2wd and 4wd, Kyosho Ultima SC, HPI Blitz
  • Super Soft Compound
  • Red Wide SC Inserts
City Block 3 Tires Pre-Mounted, 1pr, Wide, 2.2/3.2 Slash rear
1:10 SHORT COURSE CITYBLOCK 3 WIDE (SUPER SOFT) PRE-MNT RED INSERT Fits: SLASH 2WD REAR Slash 4X4 F/R ULTIMA SC The CITYBLOCK 3 tread pattern has been opened up from the original, which allows the tire to dig deeper in some of the loosest of conditions. Th..
$35.85
Out Of Stock
Extended Front & Rear Body Mounts, Slash 2wd/Pro-2 SC

This is an Extended Body Mount Kit with Secure-Loc Caps for the Slash 2wd and Pro-Line PRO-2 SC truck. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

This kit requires some type of screw attachment system, we recommend the Secure-Loc Cap Kit...PRO607002.

Features:

  • Completely adjustable body mounts so virtually any body will fit perfectly
  • Innovative screw on body mounting system ( Secure-Loc Cap )
  • Long body mounts included to fit Rally Car Bodies
  • Made from Ultra-Durable Nylon
  • Check out the Body Mount System featured in the PRO-2 SC Truck.
  • Replacement parts:
    6070-01 Body Mount Plastics
    6070-02 Secure-Loc Caps

Includes:

  • Body Mounts and Posts (Front & Rear)
  • Mounting Hardware

Fits:

  • Traxxas® Slash®
  • Pro-Line PRO-2 SC using ProTrac 6062-03 & 6062-04 Shock Towers
  • Nitro Rustler *Front Mount Only
  • Nitro Stampede
  • Rustler Electric VXL *Front Mount Only
  • Stampede Electric VXL
Extended Front & Rear Body Mounts, Slash 2wd/Pro-2 SC
This is an Extended Body Mount Kit with Secure-Loc Caps for the Slash 2wd and Pro-Line PRO-2 SC truck. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit an..
$14.38
Out Of Stock
Heavy Duty Stub Axles, Traxxas Trucks

Heavy Duty Stub Axles, Traxxas Trucks

Fits:

  • Electric Rustler
  • Electric Stampede
  • Bandit
  • Slash 2wd
  • and More, please check your manual for part number.
Heavy Duty Stub Axles, Traxxas Trucks
Heavy Duty Stub Axles, Traxxas Trucks Fits: Electric Rustler Electric Stampede Bandit Slash 2wd and More, please check your manual for part number. ..
$4.85
In Stock
Pro-2 Front Bumper and Bulkhead kit, Slash 2wd/Pro-2

This is a PRO-2 Front Bumper and Bulkhead for the Slash® 2WD and Pro-Line PRO-2 SC. Pro-Line is proud to introduce an all-new Race-inspired Front Bumper, Brace and Bulkhead for the 2WD Slash®. Now you can add Pro-Line’s Ultra Durable and Low-Profile bumper directly to your Slash® 2WD. The PRO-2 Bumper features Pro-Line’s unique “Flex Mount” brace that absorbs all impacts rather than transferring them into your Truck and potentially damaging vital components. The two vertically mounted screws that fasten the Bumper to the Brace act as pivot points for the Brace to rotate around allowing the PRO-2 Bumpers to bend but not break. The PRO-2 Bumper was also specifically designed to be as low-profile and minimalistic as possible in order to fit the different types of bodies that Slash® users run on their Trucks. The Front Bumper kit also includes a new Black Bulkhead so you can ditch the ugly grey Stock Bulkhead.

This is also a stock replacement for the Front Bumper and Bulkhead that is included with the Pro-Line PRO-2 SC truck kit.

If you love Racing and Bashing your Slash® then you need Pro-Line’s new PRO-2 Front Bumper!

Features:

  • Low Pro-file Racing inspired Bumper
  • Ultra Durable Material Combined with Proprietary “Flex Mount” Design
  • Includes a Pro-Line designed Black Bulkhead to replace your old, worn-out stock one

Included:

  • PRO-2 Front Bumper
  • “Flex Mount” Bumper Brace
  • Black Bulkhead
  • M3 x 8mm SHCS (2 pcs)
  • M4 x 12mm FHCS (4 pcs)

Fits:

  • Traxxas® Slash® 2WD
  • Pro-Line PRO-2 SC
Pro-2 Front Bumper and Bulkhead kit, Slash 2wd/Pro-2
This is a PRO-2 Front Bumper and Bulkhead for the Slash® 2WD and Pro-Line PRO-2 SC. Pro-Line is proud to introduce an all-new Race-inspired Front Bumper, Brace and Bulkhead for the 2WD Slash®. Now you can add Pro-Line’s Ultra Durable and Low-Profile bumper directly to your Slash®..
$9.25
In Stock
Screws, 3x8mm Flat-Head, Hex Drive

Screws, 3x8mm Flat-Head, Hex Drive

Typically used for mounting 540 and 550 size motors in Traxxas 2wd Vehicles.

Includes: 6pcs.

Screws, 3x8mm Flat-Head, Hex Drive
Screws, 3x8mm Flat-Head, Hex Drive Typically used for mounting 540 and 550 size motors in Traxxas 2wd Vehicles. Includes: 6pcs. ..
$2.45
In Stock
Suspension pins, TRX 2wd Vehicles

Suspension pins for Traxxas 2wd vehicles including Slash, Stampede, Rustler and Bandit.

Includes 2 pins and e-clips.

Suspension pins, TRX 2wd Vehicles
Suspension pins for Traxxas 2wd vehicles including Slash, Stampede, Rustler and Bandit. Includes 2 pins and e-clips. ..
$2.45
Out Of Stock
Traxxas Halfshafts, Long Truck W/ Metal U-Joints

Halfshafts, Long Truck W/ Metal U-Joints.
 

Traxxas Halfshafts, Long Truck W/ Metal U-Joints
Halfshafts, Long Truck W/ Metal U-Joints.   ..
$5.15
In Stock
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede

Wheelie Bar, TRX Trucks.

Fits:

  • Slash 2wd
  • Rustler
  • Stampede 2wd
  • Bandit
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede
Wheelie Bar, TRX Trucks. Fits: Slash 2wd Rustler Stampede 2wd Bandit ..
$13.25
Out Of Stock
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Blue

Wheelie Bar, TRX Trucks.

Fits:

  • Slash 2wd
  • Rustler
  • Stampede 2wd
  • Bandit
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Blue
Wheelie Bar, TRX Trucks. Fits: Slash 2wd Rustler Stampede 2wd Bandit ..
$13.25
Out Of Stock
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Green

Wheelie Bar, TRX Trucks.

Fits:

  • Slash 2wd
  • Rustler
  • Stampede 2wd
  • Bandit
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Green
Wheelie Bar, TRX Trucks. Fits: Slash 2wd Rustler Stampede 2wd Bandit ..
$13.25
In Stock
 Traxxas Steel Constant Velocity Shafts, Rear

Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.

 Traxxas Steel Constant Velocity Shafts, Rear
Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry a..
$69.96
In Stock
17mm Hex Conversion Kit, Blue, Slash/Rustler/Bandit/etc

The new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex

Fits Electric Traxxas:

  • Slash
  • Rustler VXL
  • Stampede VXL
  • Bandit VXL.
17mm Hex Conversion Kit, Blue, Slash/Rustler/Bandit/etc
The new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex Fits..
$28.25
Out Of Stock
17mm Hex Conversion Kit, Gun Metal, Slash/Rustler/Bandit

Our new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex

17mm Hex Conversion Kit, Gun Metal, Slash/Rustler/Bandit
Our new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex ..
$29.69
In Stock
17mm Hex Conversion Kit, Silver, Slash/Rustler/Bandit/etc

Our new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex

17mm Hex Conversion Kit, Silver, Slash/Rustler/Bandit/etc
Our new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex ..
$29.69
Out Of Stock
25T Pinion Gear, 48 pitch

Gear, pinion (25-tooth) (48-pitch)/ set screw

For all 1/8" pinion shaft motors.

25T Pinion Gear, 48 pitch
Gear, pinion (25-tooth) (48-pitch)/ set screw For all 1/8" pinion shaft motors. ..
$2.60
In Stock
28T Pinion Gear, 48 pitch

Gear, pinion (28-tooth) (48-pitch)/ set screw

For all 1/8" pinion shaft motors.

28T Pinion Gear, 48 pitch
Gear, pinion (28-tooth) (48-pitch)/ set screw For all 1/8" pinion shaft motors. ..
$2.60
In Stock
30deg Caster Blocks for Slash/Stampede/Rustler(elec only)

Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. Stock Bandit Caster is 25 degrees. These blocks will alter stock Bandit caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede.

Color: Black

30deg Caster Blocks for Slash/Stampede/Rustler(elec only)
Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. Stock Bandit Caster is 25 degrees. These blocks will alter stock Bandit caster settings. These Caster Blocks will not work on nitro versions o..
$8.25
In Stock
30deg Caster Blocks for Slash/Stampede/Rustler(elec only) Blue

Blue Front Caster Blocks (Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd)
RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash, electric Rustler & electric Stampede 2wd are the final link for a complete, bulletproof front suspension. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. No additional parts or modifications are necessary to mount a set to a vehicle.
RPM Caster Blocks are molded in a trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block.
Tech Notes: RPM #80715 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede nor 4wd versions of the Stampede or Slash.

 

30deg Caster Blocks for Slash/Stampede/Rustler(elec only) Blue
Blue Front Caster Blocks (Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd) RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash, electric Rustler & electric Stampede 2wd are the final link for a complete, bulletproof front suspension. RPM Caster Blocks are redesig..
$8.25
In Stock
4mm Aluminum Flanged  Wheel Nylock Nuts, Red 4pcs

4mm Aluminum Flanged Wheel Nylock Nuts, Red 4pcs.

4mm Aluminum Flanged  Wheel Nylock Nuts, Red 4pcs
4mm Aluminum Flanged Wheel Nylock Nuts, Red 4pcs. ..
$4.99
Out Of Stock
4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Blue 4pcs

4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Blue 4pcs.

4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Blue 4pcs
4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Blue 4pcs. ..
$6.25
Out Of Stock
4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Green 4pcs

4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Green 4pcs.

4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Green 4pcs
4mm Aluminum Flanged Serrated Wheel Nylock Nuts, Green 4pcs. ..
$6.25
Out Of Stock
6mm HD Front Shock Tower, Pede Rustler Bandit Slash, GM

Stampede/Rustler/Bandit/Slash 6mm HD Alum. Front Shock Tower (Gun Metal)

Using high quality CNC machined aluminum, these shock towers increase strength and enhance the looks of any Traxxas electric Stampede, Rustler, Bandit or the new Slash. Comes with all hardware (screws) and aluminum upper shock mount bushings.

6mm HD Front Shock Tower, Pede Rustler Bandit Slash, GM
Stampede/Rustler/Bandit/Slash 6mm HD Alum. Front Shock Tower (Gun Metal) Using high quality CNC machined aluminum, these shock towers increase strength and enhance the looks of any Traxxas electric Stampede, Rustler, Bandit or the new Slash. Comes with all hardware (screws) ..
$19.50
Out Of Stock
6mm HD Front Shock Tower, Pede Rustler Bandit Slash, Red

Stampede/Rustler/Bandit/Slash 6mm HD Alum. Front Shock Tower (Redl)

Using high quality CNC machined aluminum, these shock towers increase strength and enhance the looks of any Traxxas electric Stampede, Rustler, Bandit or the new Slash. Comes with all hardware (screws) and aluminum upper shock mount bushings.

6mm HD Front Shock Tower, Pede Rustler Bandit Slash, Red
Stampede/Rustler/Bandit/Slash 6mm HD Alum. Front Shock Tower (Redl) Using high quality CNC machined aluminum, these shock towers increase strength and enhance the looks of any Traxxas electric Stampede, Rustler, Bandit or the new Slash. Comes with all hardware (screws) and a..
$19.50
Out Of Stock
6mm HD Rear Shock Tower, Pede Rustler Bandit Slash, GM

Stampede/Rustler/Bandit/Slash 6mm HD Alum. Rear Shock Tower (Gun Metal)

Using high quality CNC machined aluminum, these shock towers increase strength and enhance the looks of any Traxxas electric Stampede, Rustler, Bandit or the new Slash. Comes with all hardware (screws) and aluminum upper shock mount bushings.

6mm HD Rear Shock Tower, Pede Rustler Bandit Slash, GM
Stampede/Rustler/Bandit/Slash 6mm HD Alum. Rear Shock Tower (Gun Metal) Using high quality CNC machined aluminum, these shock towers increase strength and enhance the looks of any Traxxas electric Stampede, Rustler, Bandit or the new Slash. Comes with all hardware (screws) a..
$22.89
Out Of Stock
Slash, 2wd, Parts, Traxxas, Steel, drives, for, w/Steel, Hexes, Billet, Machined, Steering, Bellcrank, Slash/Rustler/Bandit/etc