Rustler/Stampede Electric/Nitro Jato

Rustler/Stampede Electric/Nitro Jato

Rustler/Stampede Electric/Nitro Jato

Display: List / Grid
Show:
Sort By:
Extended Front & Rear Body Mounts, Slash 2wd/Pro-2 SC

This is an Extended Body Mount Kit with Secure-Loc Caps for the Slash 2wd and Pro-Line PRO-2 SC truck. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

This kit requires some type of screw attachment system, we recommend the Secure-Loc Cap Kit...PRO607002.

Features:

  • Completely adjustable body mounts so virtually any body will fit perfectly
  • Innovative screw on body mounting system ( Secure-Loc Cap )
  • Long body mounts included to fit Rally Car Bodies
  • Made from Ultra-Durable Nylon
  • Check out the Body Mount System featured in the PRO-2 SC Truck.
  • Replacement parts:
    6070-01 Body Mount Plastics
    6070-02 Secure-Loc Caps

Includes:

  • Body Mounts and Posts (Front & Rear)
  • Mounting Hardware

Fits:

  • Traxxas® Slash®
  • Pro-Line PRO-2 SC using ProTrac 6062-03 & 6062-04 Shock Towers
  • Nitro Rustler *Front Mount Only
  • Nitro Stampede
  • Rustler Electric VXL *Front Mount Only
  • Stampede Electric VXL
Extended Front & Rear Body Mounts, Slash 2wd/Pro-2 SC
This is an Extended Body Mount Kit with Secure-Loc Caps for the Slash 2wd and Pro-Line PRO-2 SC truck. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit an..
$14.38
Out Of Stock
Heavy Duty Stub Axles, Traxxas Trucks

Heavy Duty Stub Axles, Traxxas Trucks

Fits:

  • Electric Rustler
  • Electric Stampede
  • Bandit
  • Slash 2wd
  • and More, please check your manual for part number.
Heavy Duty Stub Axles, Traxxas Trucks
Heavy Duty Stub Axles, Traxxas Trucks Fits: Electric Rustler Electric Stampede Bandit Slash 2wd and More, please check your manual for part number. ..
$4.85
In Stock
Pro-2 Front Bumper and Bulkhead kit, Slash 2wd/Pro-2

This is a PRO-2 Front Bumper and Bulkhead for the Slash® 2WD and Pro-Line PRO-2 SC. Pro-Line is proud to introduce an all-new Race-inspired Front Bumper, Brace and Bulkhead for the 2WD Slash®. Now you can add Pro-Line’s Ultra Durable and Low-Profile bumper directly to your Slash® 2WD. The PRO-2 Bumper features Pro-Line’s unique “Flex Mount” brace that absorbs all impacts rather than transferring them into your Truck and potentially damaging vital components. The two vertically mounted screws that fasten the Bumper to the Brace act as pivot points for the Brace to rotate around allowing the PRO-2 Bumpers to bend but not break. The PRO-2 Bumper was also specifically designed to be as low-profile and minimalistic as possible in order to fit the different types of bodies that Slash® users run on their Trucks. The Front Bumper kit also includes a new Black Bulkhead so you can ditch the ugly grey Stock Bulkhead.

This is also a stock replacement for the Front Bumper and Bulkhead that is included with the Pro-Line PRO-2 SC truck kit.

If you love Racing and Bashing your Slash® then you need Pro-Line’s new PRO-2 Front Bumper!

Features:

  • Low Pro-file Racing inspired Bumper
  • Ultra Durable Material Combined with Proprietary “Flex Mount” Design
  • Includes a Pro-Line designed Black Bulkhead to replace your old, worn-out stock one

Included:

  • PRO-2 Front Bumper
  • “Flex Mount” Bumper Brace
  • Black Bulkhead
  • M3 x 8mm SHCS (2 pcs)
  • M4 x 12mm FHCS (4 pcs)

Fits:

  • Traxxas® Slash® 2WD
  • Pro-Line PRO-2 SC
Pro-2 Front Bumper and Bulkhead kit, Slash 2wd/Pro-2
This is a PRO-2 Front Bumper and Bulkhead for the Slash® 2WD and Pro-Line PRO-2 SC. Pro-Line is proud to introduce an all-new Race-inspired Front Bumper, Brace and Bulkhead for the 2WD Slash®. Now you can add Pro-Line’s Ultra Durable and Low-Profile bumper directly to your Slash®..
$9.25
In Stock
Screws, 3x8mm Flat-Head, Hex Drive

Screws, 3x8mm Flat-Head, Hex Drive

Typically used for mounting 540 and 550 size motors in Traxxas 2wd Vehicles.

Includes: 6pcs.

Screws, 3x8mm Flat-Head, Hex Drive
Screws, 3x8mm Flat-Head, Hex Drive Typically used for mounting 540 and 550 size motors in Traxxas 2wd Vehicles. Includes: 6pcs. ..
$2.45
In Stock
Suspension pins, TRX 2wd Vehicles

Suspension pins for Traxxas 2wd vehicles including Slash, Stampede, Rustler and Bandit.

Includes 2 pins and e-clips.

Suspension pins, TRX 2wd Vehicles
Suspension pins for Traxxas 2wd vehicles including Slash, Stampede, Rustler and Bandit. Includes 2 pins and e-clips. ..
$2.45
Out Of Stock
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede

Wheelie Bar, TRX Trucks.

Fits:

  • Slash 2wd
  • Rustler
  • Stampede 2wd
  • Bandit
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede
Wheelie Bar, TRX Trucks. Fits: Slash 2wd Rustler Stampede 2wd Bandit ..
$13.25
Out Of Stock
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Blue

Wheelie Bar, TRX Trucks.

Fits:

  • Slash 2wd
  • Rustler
  • Stampede 2wd
  • Bandit
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Blue
Wheelie Bar, TRX Trucks. Fits: Slash 2wd Rustler Stampede 2wd Bandit ..
$13.25
Out Of Stock
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Green

Wheelie Bar, TRX Trucks.

Fits:

  • Slash 2wd
  • Rustler
  • Stampede 2wd
  • Bandit
Wheelie Bar, TRX Trucks, Slash/Rustler/Stampede, Green
Wheelie Bar, TRX Trucks. Fits: Slash 2wd Rustler Stampede 2wd Bandit ..
$13.25
In Stock
14mm Clamp Hexes, Silver, Stampede/Rustler/Bandit

Stampede 14mm Clamp Style Alum. Wheel Hex (Silver)

Give your Traxxas Stampede a higher and wider stance using these 14mm clamp style alum. wheel hex (which allow the use of Larger wheels and tire combos) Using high quality CNC machined aluminum, these clamp style alum. wheel hex locks down on the axle pins so loosing pins are no longer a problem for your Traxxas electric Stampede. Aluminum hex are also more durable and less likely to strip out and provides a better fit to the wheel hex.

We recommend 1/2" offset wheels for suspensoin clearance and wider stance.

14mm Clamp Hexes, Silver, Stampede/Rustler/Bandit
Stampede 14mm Clamp Style Alum. Wheel Hex (Silver) Give your Traxxas Stampede a higher and wider stance using these 14mm clamp style alum. wheel hex (which allow the use of Larger wheels and tire combos) Using high quality CNC machined aluminum, these clamp style alum. wheel..
$14.95
Out Of Stock
17mm Hex Conversion Kit, Blue, Slash/Rustler/Bandit/etc

The new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex

Fits Electric Traxxas:

  • Slash
  • Rustler VXL
  • Stampede VXL
  • Bandit VXL.
17mm Hex Conversion Kit, Blue, Slash/Rustler/Bandit/etc
The new 17mm hex conversion kit allows Slash, Stampede, Rustler and Bandit owners to put on high-traction 1/8th scale buggy tires for increased performance and wider range of tire selection.  New Ver.2 Design using aluminum lock-nut to hold down the 17mm hex Fits..
$28.25
Out Of Stock
4x7x2.5mm Ball Bearing 1 pr.

4x7x2.5mm Ball Bearing 1 pr.

4x7x2.5mm Ball Bearing 1 pr.
4x7x2.5mm Ball Bearing 1 pr. ..
$3.89
In Stock
KIM370   70 Tooth 32 Pitch Precision Gear for Traxxas

Replace your stripped gear or change the gear ratio of your older Traxxas Nitro RTR truck with these gears from Kimbrough.

Fits older Nitro Rustler and Stampede. Does not fit the newer torque control slipper well. If installed on newer slipper, gear will wear out faster, strip easier and increase wear on motor bearing.

KIM370   70 Tooth 32 Pitch Precision Gear for Traxxas
Replace your stripped gear or change the gear ratio of your older Traxxas Nitro RTR truck with these gears from Kimbrough. Fits older Nitro Rustler and Stampede. Does not fit the newer torque control slipper well. If installed on newer slipper, gear will wear out faster, strip..
$2.99
In Stock
72 Tooth 32 Pitch Precision Gear for Nitro Traxxas

Replace your stripped gear or change the gear ratio of your older Traxxas Nitro RTR truck with these gears from Kimbrough.

Fits older Nitro Rustler and Stampede. Does not fit the newer torque control slipper well. If installed on newer slipper, gear will wear out faster, strip easier and increase wear on motor bearing.

72 Tooth 32 Pitch Precision Gear for Nitro Traxxas
Replace your stripped gear or change the gear ratio of your older Traxxas Nitro RTR truck with these gears from Kimbrough. Fits older Nitro Rustler and Stampede. Does not fit the newer torque control slipper well. If installed on newer slipper, gear will wear out faster, strip..
$2.99
Out Of Stock
76T Spur Gear for Torque Control Slipper, TRX, Slash etc.

Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch).

This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number.

76T Spur Gear for Torque Control Slipper, TRX, Slash etc.
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch). This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number. ..
$2.85
In Stock
KIM378 78 tooth 48 pitch precision gear

For Traxxas Electrics that use the 48 pitch fine tooth spur gears. Must use a matching 48 pitch pinion gear.

KIM378 78 tooth 48 pitch precision gear
For Traxxas Electrics that use the 48 pitch fine tooth spur gears. Must use a matching 48 pitch pinion gear. ..
$3.65
Out Of Stock
83T Spur Gear for Torque Control Slipper, TRX, Slash etc.

Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch).

This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number.

83T Spur Gear for Torque Control Slipper, TRX, Slash etc.
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch). This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number. ..
$2.85
In Stock
86T Spur Gear for Torque Control Slipper, TRX, Slash etc.

Spur gear, 86-tooth (48-pitch) (for models with Torque Control slipper clutch).

This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number.

86T Spur Gear for Torque Control Slipper, TRX, Slash etc.
Spur gear, 86-tooth (48-pitch) (for models with Torque Control slipper clutch). This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number. ..
$2.85
In Stock
90T Spur Gear for Torque Control Slipper, TRX, Slash etc.

Spur gear, 90-tooth (48-pitch) (for models with Torque Control slipper clutch).

This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number.

90T Spur Gear for Torque Control Slipper, TRX, Slash etc.
Spur gear, 90-tooth (48-pitch) (for models with Torque Control slipper clutch). This is a stock replacement part and is for Slash 2wd, Possibly others, check your kits manual for part number. ..
$2.85
In Stock
ACEB17LBK  Outlaw Race Pipe, Left Side, Black

Outlaw Race Pipe for Left Side applications.

Anodized Black Alum. It is NOT silver as pictured.

This pipe fits Rustler, Stampede and Nitro Touring cars. Fits others with left side exhuast layout.

ACEB17LBK  Outlaw Race Pipe, Left Side, Black
Outlaw Race Pipe for Left Side applications. Anodized Black Alum. It is NOT silver as pictured. This pipe fits Rustler, Stampede and Nitro Touring cars. Fits others with left side exhuast layout. ..
$9.95
In Stock
Alum. Front Arms, Rustler/Stampede, Purple

Machined Alum. Front Arms.

Fits Traxxas Rustler and Stampede... maybe others.

Anodized Purple.

Includes shocks mount screws and suspension pins.

Alum. Front Arms, Rustler/Stampede, Purple
Machined Alum. Front Arms. Fits Traxxas Rustler and Stampede... maybe others. Anodized Purple. Includes shocks mount screws and suspension pins. ..
$11.55
In Stock
Alum. Front Bulkhead, Silver, TRX 2wd Vehicles

Golden Horizon Aluminum Front Bulkhead (Silver). For Traxxas Rustler(VXL)/Stampede(VXL)/Bandit VXL. Replaces the stock plastic front bulkhead, part # TRA2530(A)

Fits:

  • Slash(E/N)
  • Bandit
  • Rustler(E/N)
  • Stampede(E/N)
  • Craniac/Skully
Alum. Front Bulkhead, Silver, TRX 2wd Vehicles
Golden Horizon Aluminum Front Bulkhead (Silver). For Traxxas Rustler(VXL)/Stampede(VXL)/Bandit VXL. Replaces the stock plastic front bulkhead, part # TRA2530(A) Fits: Slash(E/N) Bandit Rustler(E/N) Stampede(E/N) Craniac/Skully ..
$27.85
In Stock
Alum. Rear Arm Mounts, Rustler/Stampede, Purple

Machined Alum. Rear Arm Carrier

Fits Traxxas Rustler and Stampede... maybe others.

Anodized Purple.

Includes Left and Right side mounts.

Alum. Rear Arm Mounts, Rustler/Stampede, Purple
Machined Alum. Rear Arm Carrier Fits Traxxas Rustler and Stampede... maybe others. Anodized Purple. Includes Left and Right side mounts. ..
$8.45
In Stock
Alum. Rear Arms, Rustler/Stampede, Purple

Machined Alum. Rear Arms.

Fits Traxxas Rustler and Stampede... maybe others.

Anodized Purple.

Includes shocks mounts and hardware.

Alum. Rear Arms, Rustler/Stampede, Purple
Machined Alum. Rear Arms. Fits Traxxas Rustler and Stampede... maybe others. Anodized Purple. Includes shocks mounts and hardware. ..
$12.85
In Stock
Alum. Rear Hubs, Slash/Rustler/Stampede, Purple

Machined Alum. Rear Hubs.

Fits Traxxas Slash, Rustler and Stampede... maybe others.

Anodized Purple.

Includes Suspension Pins and E-clips



Alum. Rear Hubs, Slash/Rustler/Stampede, Purple
Machined Alum. Rear Hubs. Fits Traxxas Slash, Rustler and Stampede... maybe others. Anodized Purple. Includes Suspension Pins and E-clips ..
$11.25
Out Of Stock
Rustler/Stampede, Electric/Nitro, Jato, Traxxas, Alum., Rear, Arm, Mounts, Purple, Front, Springs, Nitro, Rustler, Stampede, White