1/10th Car & Truck Kits

1/10th Car & Truck Kits

1/10th Team Associated Car & Truck Kits.

Display: List / Grid
Show:
Sort By:
Associated RC10F6 Factory Team 1/10 F1 Kit
1:10 Scale Electric 2WD On-Road Competition Race Car

Team Associated is proud to release its entry to the 1:10 scale 2WD electric formula car racing class, the RC10F6 Factory Team Kit, geared for precision and the ultimate in performance.

Full-scale Formula racing is considered one of the most elite forms of racing in existence, with technology and looks off the chart. The engineers behind the doors of Area 51 put maximum effort into the design of the RC10F6 FT kit to make sure the same could be said about their scaled-down version. With a full cast of setting options, an ultra-low center of mass, and sleek styling, the RC10F6 FT is designed to put you at the front of the Formula grid.

With an increase in entries greater than any class at the highly contested ETS series, Formula is growing at a rapid rate. All aspects of the RC10F6 FT were considered and optimized to make sure it would stand above its competition. Performance, adjustability, durability, and style were weighed heavily, and the RC10F6 FT kit shows its hand with a complete package of adjustments and options right out of the box. From front to back, with graphite control arms, the fully adjustable front end, the ultra-smooth rear pivot, and wings styled after current full-scale Formula rulings, no corner was left untouched. At an affordable price point, the RC10F6 FT comes with everything to assure you will be at the front of the pack. With such a well-balanced platform, it's easy to see that the RC10F6 FT kit is another Champion by Design from Team Associated!
 
This vehicle needs extra parts to make it operational. Click on the SPECS tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
Prototype shown. Due to ongoing R&D, photos may not match final kit. RC10F6 Factory Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.

Features

  • 2.5mm graphite chassis for optimized flex characteristics
  • Front and rear wings modeled after 2017 Formula rules included
  • FOX(R) Genuine Kashima Coat center shock for minimal friction and extended wear
  • Chassis design allows for multiple battery configurations
  • New center pivot design for optimized rear pod assembly
  • Lightweight graphite axle for increased durability and rigidity
  • Differential thrust bearing assembly for smooth action and extended life between rebuilds
  • Rear axle accepts all standard spur gears without adapter
  • Two steering bellcrank options for fine tuning Ackermann and steering rate
  • Servo mounts can be switched from "fixed" to "floating" to allow more flex in the front of the chassis
  • Integrated droop posts for adjusting droop without disassembly

    Vehicle Specifications

    Power Source: Electric
    Terrain: On-Road
    Body Style: F1
    Scale Size: 1:10 Scale
    Assembly Level: Kit*
    Length: 432.5mm (17.03in)
    Width: varies
    Wheelbase: varies
    Weight: 345*g (0.76lbs)
    Internal
    Gear Ratio:
    1:1
    Drive: 2WD
    * This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

    Required to Complete

    • 1:10 scale electric motor
    • Electronic speed control
    • 3.7V-7.4V LiPo, or 6.0V LiFe with "shorty" battery dimensions
    • Battery charger (suited for one of the batteries mentioned above)
    • 2-channel surface transmitter
    • 2-channel receiver
    • Steering servo
    • 1:10 scale Lexan(R) formula body
    • Lexan(R) specific spray paint for body
    • 1:10 scale formula wheels and rubber (or foam) formula tires
    • Helpful Item: Silicone Shock Fluid (Refer to catalog for complete listings)
    • Helpful Item: Silicone Diff Fluid (Refer to catalog for complete listings)
    • Helpful Item: Body scissors (AE Part #1737)
    • Helpful Item: Reamer/Hole Punch
    • Helpful Item: FT Hex Wrenches (AE Part #1518)
    • Helpful Item: FT Nut Drivers (AE Part #1519)
    • Helpful Item: FT Turnbuckle Wrench (AE Part #1111)
    • Helpful Item: Hobby knife
    • Helpful Item: Needle nose pliers
    • Helpful Item: Wire cutters
    • Helpful Item: Soldering iron
    • Helpful Item: Calipers or a precision ruler


Associated RC10F6 Factory Team 1/10 F1 Kit
1:10 Scale Electric 2WD On-Road Competition Race Car Team Associated is proud to release its entry to the 1:10 scale 2WD electric formula car racing class, the RC10F6 Factory Team Kit, geared for precision and the ultimate in performance. Full-scale Formula racing is cons..
$339.99
In Stock
RC10B6 High Bite Edition, 1/10th scale 2wd Buggy Kit

Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 16 I.F.M.A.R. World Championships contested since the racing class began. In fact, every Team Associated 2WD buggy platform ever released has won at least one I.F.M.A.R. World Championship!

Divide and conquer! In today's racing, traction dictates your setup -- period! With both B6 and B6D configurations available, getting to the top of the podium has never been easier. Out of the box, the B6 offers racers a setup developed for high to very-high traction, whereas the B6D excels when traction is low to high. Racing at multiple tracks, or where traction changes throughout the day, has never been easier; setups and tuning parts are interchangeable between the two configurations, making the B6 platform extremely versatile. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!
 

This vehicle needs extra parts to make it operational. Click on the SPECS tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
RC10B6 Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, XP receiver, wheels, tires, and pinion gear. Body comes clear. Assembly and painting required.

Features

  • Turf/Carpet/Clay configuration
  • 3-gear laydown Stealth(TM) transmission: lower CG and reduced polar moment
  • Gear diffential: more corner speed and forward acceleration
  • Gull-wing front arms with wider shock tower: lower CG and increased on-power steering
  • Ability to mount shocks on front or rear of rear arms
  • Hard anodized aluminum pocketed chassis included. Optional weights (not included) allow weight bias tuning.
  • Reverse bell-crank steering rack design allows more room for electronics
  • Repositioned A plate provides maximum front end clearance
  • One-piece steering blocks with bolt on Ackermann plate
  • Lightweight and durable aluminum C plate and aluminum ball stud mount
  • Updated ball cups and turnbuckles for precise adjustments and durability
  • Adjustable battery hold-down strap allows weight bias tuning
  • Aluminum front axle and rear hexes for less rotating mass and long-lasting durability
  • V2 12mm "Big Bore" threaded aluminum shocks with 3mm TiN coated shafts and low friction x-rings for improved smoothness
  • Factory Team Aluminum Shock Bushings provide stable shock mounts
  • Heavy-duty rear axle for added strength
  • Factory Team upgraded ball bearings
  • Team Associated clear body and screw-mounted wing by JConcepts(TM)
RC10B6 High Bite Edition, 1/10th scale 2wd Buggy Kit
Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 16 I.F.M.A.R. World Championships contested since the racing class began. In fact, every ..
$309.99
Pre-Order
RC10B64 Team Kit, 1/10 4WD Electric Competition Buggy Kit

RC10B64 Team Kit, 1/10 4WD Electric Competition Buggy Kit

Speed, grip, and durability
Designed to take advantage of today's faster-than-ever tracks, the RC10B64 Team Kit offers increased durability, all new suspension geometry, a wider tuning window, improved weight distribution, and easy maintenance. Excelling on high-traction surfaces, the B64's adjustable axle height and roll centers result in a
stable yet nimble platform. With a new and improved center slipper using Low Coefficient Friction (LCF) pads, the B64 rewards the driver with maximum drive out of all four wheels on artificial turf and carpet surfaces.

(shown assembled and painted for display purposes only)

Features:

  • New Adjustable Center Slipper Clutch W/ Low Coefficient Friction Pads
  • 7075 Hard annodized Narrow Aluminum Chassis W/ Light-Weight Plastic Side Guards
  • Refined Arm Mount Geometry With Quick and Easy Tuning
  • Strengthened Front and Rear Suspension, Aluminum Caster Blocks, and Carbon Fiber Shock Towers
  • V2 12mm Big Bore Threaded Aluminum Shocks W/ 3mm TiN Coated Shafts
RC10B64 Team Kit, 1/10 4WD Electric Competition Buggy Kit
RC10B64 Team Kit, 1/10 4WD Electric Competition Buggy Kit Speed, grip, and durability Designed to take advantage of today's faster-than-ever tracks, the RC10B64 Team Kit offers increased durability, all new suspension geometry, a wider tuning window, improved weight distribut..
$429.99
Out Of Stock
RC10B64D Team Kit 1/10 4WD Electric Competition Buggy Kit

RC10B64D Team Kit 1/10 4WD Electric Competition Buggy Kit

Speed, grip, and durability
Designed to take advantage of today's faster-than-ever tracks, the RC10B64D Team Kit offers increased durability, all new suspension geometry, a wider tuning window, improved weight distribution, and easy maintenance. Excelling on high-traction surfaces, the B64D's adjustable axle height and roll centers result in a stable yet nimble platform. With a new and improved center differential, the B64D rewards the driver with maximum drive out of all four wheels on dirt and clay surfaces.

Features

  • Robust suspension arms with multiple shock mounting positions
  • 7075 hard-anodized narrow aluminum chassis with lightweight plastic side guards
  • Aluminum floating motor mount allows consistent torsional chassis flex
  • Aluminum/carbon fiber floating servo mount offers a tweak-free assembly
  • Easy access to differentials allow quick tuning and maintenance
  • Front and rear anti-roll bars provide flat cornering
  • Center gear differential maximizes drive out of the corner
  • 12mm aluminum drive hexes in both front and rear
  • Stiff and lightweight 4mm thick carbon fiber shock towers
  • Fully adjustable aluminum front and rear suspension arm mounts
  • Precision-made aluminum caster blocks for added durability
  • B6 generation ball cups and turnbuckles for precise adjustments and durability
  • All metric hardware
  • V2 12mm big bore threaded aluminum shocks with TiN shock shafts
  • Option to mount rear shocks on either the front or rear of the rear arms
  • Factory Team upgraded ball bearings
  • Team Associated clear body and screw-mounted wing by JConcepts
  • Factory Team Aluminum Shock Bushings provide a stable shock mount base




  •  
  •  
  • Note: RC10B64D Team Kit shown equipped with items NOT included in kit: motor, battery, ESC, servo, receiver, pinion gear, wheels, tires, and inserts. Body comes clear. Assembly and painting required.

     

    Power Source: Electric
    Terrain: Off-Road
    Body Style: Buggy
    Scale Size: 1:10 Scale
    Assembly Level: Kit*
    Length: varies
    Width: varies
    Wheelbase: 284mm (11.18in)
    Weight: varies
    Internal
    Gear Ratio:
    2.47:1
    Drive: 4WD
    * This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

    Required to Complete

    • RC 2-channel surface frequency radio system
    • Batteries: 2S, 7.4V LiPo Shorty battery pack
    • Battery charger (peak detection charger recommended)
    • Electronic speed control
    • RC electric motor
    • Pinion gear
    • Steering servo
    • 1:10 scale tires and inserts
    • 1:10 scale wheels
    • Recommended: tools, paint for polycarbonate body, glue for tires
RC10B64D Team Kit 1/10 4WD Electric Competition Buggy Kit
RC10B64D Team Kit 1/10 4WD Electric Competition Buggy Kit Speed, grip, and durability Designed to take advantage of today's faster-than-ever tracks, the RC10B64D Team Kit offers increased durability, all new suspension geometry, a wider tuning window, improved weight distribu..
$429.99
Out Of Stock
RC10B6D Dirt Edition Kit, 1/10th scale 2wd Buggy

Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 16 I.F.M.A.R. World Championships contested since the racing class began. In fact, every Team Associated 2WD buggy platform ever released has won at least one I.F.M.A.R. World Championship!

Divide and conquer! In today's racing, traction dictates your setup -- period! With both B6 and B6D configurations available, getting to the top of the podium has never been easier. Out of the box, the B6 offers racers a setup developed for high to very-high traction, whereas the B6D excels when traction is low to high. Racing at multiple tracks, or where traction changes throughout the day, has never been easier; setups and tuning parts are interchangeable between the two configurations, making the B6 platform extremely versatile. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!
 

This vehicle needs extra parts to make it operational. Click on the SPECS tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
RC10B6D Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, XP receiver, wheels, tires, and pinion gear. Body comes clear. Assembly and painting required.

Features

  • Clay/Hard Dirt/Loose Dirt configuration
  • Standup 3-gear Stealth(TM) transmission: more rearward weight for increased rear traction
  • Ball differential: more rear traction and stability
  • Flat front arms with narrower shock tower: more responsive steering and quicker release out of corner
  • Hard anodized aluminum pocketed chassis included. Optional weights (not included) allow weight bias tuning.
  • Centralized motor positioning for optimum side-to-side balance
  • Repositioned A plate provides maximum front end clearance
  • One-piece steering blocks with bolt on Ackermann plate
  • Lightweight and durable aluminum C plate and aluminum ball stud mount
  • Updated ball cups and turnbuckles for precise adjustments and durability
  • Adjustable battery hold-down strap allows weight bias tuning
  • Aluminum front axle and rear hexes for less rotating mass and long-lasting durability
  • V2 12mm "Big Bore" threaded aluminum shocks with 3mm TiN coated shafts and low friction x-rings for improved smoothness
  • Factory Team Aluminum Shock Bushings provide stable shock mounts
  • Heavy-duty rear axle for added strength
  • Factory Team upgraded ball bearings
  • Team Associated clear body and screw-mounted wing by JConcepts(TM)
RC10B6D Dirt Edition Kit, 1/10th scale 2wd Buggy
Champions by design. 1:10 scale 2WD off road has been Team Associated's signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 12 of the 16 I.F.M.A.R. World Championships contested since the racing class began. In fact, every Team..
$309.99
In Stock
RC10SC5M Mid Motor ShortCourse Truck, Team Kit

1:10 SCALE 2WD MID MOTOR ELECTRIC OFF ROAD COMPETITION TRUCK KIT

Based on Team Associated's wildly successful, race-winning RC10B5M platform, the RC10SC5M Team Kit represents the next step in the evolution of competitive short-course racing.

From great beginnings:
Starting with the data acquired through the development of the B5M and T5M, the engineers behind the doors of Team Associated's AREA 51 set out to design the ultimate short-course truck chassis that utilizes all the advantages that come with a mid-motor configuration.

Designed to win:
The RC10SC5M Team Kit features a high-performance, no-compromise dedicated mid-motor designed chassis, configured specifically for short course. The RC10SC5M Team Kit shares nearly 90% of the parts as the B5M and T5M Team Kits, making it easier than ever to run multiple classes at the same time.

The right parts for the best performance:
From the aluminum hard anodized chassis, to the Factory Team V2 threaded shocks, to the Factory Team VTS slipper clutch, the RC10SC5M Team Kit comes with all of these features and many more. Through testing and racing, these specific parts have been hand selected to deliver the ultimate short-course truck performance.

RC10SC5M Team Kit Features:

  • Advanced B5M mid-motor design developed and applied to a short-course truck platform
  • Narrow, hard-anodized aluminum chassis with centralized mass and mid-motor position for improved handling on high-grip offroad tracks
  • Chassis fits R.O.A.R.-approved 2S saddle packs and 2S short packs using optional foam insert
  • V2 12mm Big Bore threaded aluminum shocks with 3mm shafts and low-friction O-rings
  • Updated four-gear transmission with lighter aluminum top shaft, stronger gears, precision ball bearings, and a 14-carbide-ball differentia
  • Pro-Line SC5M clear body included
  • Factory Team aluminum rear ball stud mount included
  • New inline front suspension features heavy duty steering and caster blocks, while the insert system allows for easy caster and trailing axle adjustments
  • Adjustable front suspension mount angle (kick-up) options of 25 and 30
  • One-piece front axle/hex adapter and large front wheel bearing for added durability
  • Full bearing steering system with horizontal ball studs for finer Ackermann adjustments
  • Heavy-duty ball cups and ball studs allow for maximum suspension travel while reducing binding and friction
  • Rear hubs feature large rear wheel bearings, as well as the quick and easy insert system to adjust camber link position and rear toe-in

  •  
RC10SC5M Team Kit Specifications
Scale: 10
Power Electric
Length 540mm
Width *Varies
Weight *Varies
Wheelbase 320-324mm*
Drive 2WD



*Final width and weight will vary with the actual electronics, wheels, and tires used to complete the SC5M Team Kit.
RC10SC5M Mid Motor ShortCourse Truck, Team Kit
1:10 SCALE 2WD MID MOTOR ELECTRIC OFF ROAD COMPETITION TRUCK KIT Based on Team Associated's wildly successful, race-winning RC10B5M platform, the RC10SC5M Team Kit represents the next step in the evolution of competitive short-course racing. From great beginnings: Starting..
$309.99
Out Of Stock
RC10T5M Stadium Truck Team Kit

Since the beginning of the class, Team Associated has been the leader in 1:10 scale 2WD truck racing. 

Over 24 years have come and gone since the first RC10T made its debut in 1991 and created a winning legacy that continues today in a truck class which is ever evolving.

Making the perfect marriage. By taking the proven championship-winning RC10T4 platform and applying the technologies used in the B5M, the engineers of Team Associated’s Area 51 created the RC10T5M. Like the B5M, the T5M has an aluminum chassis and mid-motor configuration that are designed to take full advantage of the surface conditions and high traction levels available on today’s tracks.

The RC10T5M has been designed and built to the highest standard to give racers the performance edge over the competition.

 

RC10T5M Team Kit Features:

  • Advanced mid-motor design developed and applied to the race-winning RC10T truck platform Narrow, hard-anodized aluminum chassis with centralized mass and mid-motor position for improved handling on high-grip offroad tracks
  • Chassis fits R.O.A.R.-approved 2S saddle packs and 2S short packs using optional foam inserts
  • Factory Team V2 12mm Big Bore-threaded aluminum shocks with 3mm shafts and low-friction O-rings
  • Four-gear transmission with lighter aluminum top shaft, stronger gears, precision ball bearings, and a 14-carbide ball differential for increased life and torque capacity
  • Adjustable front suspension mount angle (kick-up) options of 25° and 30° Pro-Line T5M clear body and spoiler included
  • Aluminum rear ball stud mount included
  • New inline front suspension features heavy-duty steering and caster blocks, while the insert system allows for easy caster and trailing axle adjustments
  • One-piece front axle/hex adapter and larger front wheel bearing for added durability
  • Full bearing steering system with horizontal ball studs for finer Ackermann adjustments
  • Heavy-duty ball cups and ball studs allow for maximum suspension travel while reducing binding and friction
  • Rear hubs feature larger bearings as well as the quick and easy insert system to adjust camber link position and rear toe-in

    RC10T5M Team Kit shown equipped with items NOT included in kit: Reedy motor, Reedy battery, Reedy ESC, XP servo, XP receiver, wheels, tires, and pinion gear. Body comes clear. Assembly and painting required.

RC10T5M Stadium Truck Team Kit
Since the beginning of the class, Team Associated has been the leader in 1:10 scale 2WD truck racing.  Over 24 years have come and gone since the first RC10T made its debut in 1991 and created a winning legacy that continues today in a truck class which is ever evolving...
$279.99
In Stock
1/10th, Car, Truck, Kits, Team, Associated, RC10SC5M, Mid, Motor, ShortCourse, Kit, RC10T5M, Stadium